1.5 Resetting the LIVE SD 1.6 Setting the Volume Vario Accoustics Settings no sound Auto silent 1.7 Flight Start and Recording Flight Start Start Speed...
Page 21
The Gain indicator keeps track of how much altitude is being gained in the thermal. When a pilot enters a thermal the LIVE SD will reset the Gain indicator to 0 and will start to track how much altitude the pilot has gained. At a certain point in the thermal the lift may become weaker and inconsistent.
Page 25
WARNING: Do not confuse this function with . The last thing you want is to be sitting on takeo with no Delete Task waypoints in the LIVE SD , to clear the previous Taskuse the function described in section Section 4.1.2.
Page 26
Taskpoint Go To Take-O Take-o TaskPoint Menu Edit Move Remove Taskpoint Exit start Entry start Closing Time Land In WARNING: Whenever a modication is done to the Task, navigation will be restarted at the beginning of the Task.
Page 27
task points Take-o task point Edit Route Point task point type Time Time Time Time Goal Close Land In Move Route Point Remove Route Point Note: Only the designated pilot can send the task to the server. The default radius can be modied (see Section 4.10.16).
4.10.1 Set Altimeter Set Altimeter http://www.xcmag.com/2011/ 07/gps-versus-barometric-altitude-the-definitive-answer/ Get from GPS Yes No Auto Get from GPS Auto Auto position dilution of precision...
4.10.2 Time Time Vario Integrator Track Interval track interval 4.10.3 Vario Acoustics Vario Acoustics...
Page 40
Climb Threshold Climb Threshold Sink Threshold Sink Alarm Sink Alarm Base Frq Incre- ments Base Frq Base Frq Audio Frequencies Base Frq Base Frq Base Frq Increments incre- ments Increments Increments Base Frq no sound Flight Mode...
Page 63
Triangle Size Triangle Size Note: Both the Vertex 1, and Vertex 2 can be redened in any moment.
Page 64
Triangle Size Note: If the pilot moves around the valid area and goes to a point which results in a bigger triangle size vertex 3 is updated accordingly.
Need help?
Do you have a question about the LIVE SD and is the answer not in the manual?
Questions and answers