Table of Contents
Advertisement
Setup connection
1.
Press Start - Control Panel - Phone and Modem options.
2.
Switch to Dialing rules tab, press button "New", input GPRS to the Location
name, input "00" to Area code.
3.
Switch to Modems tab, press button "Add", select the "Don't detect my modem;
select it from a list" - Next.
4.
Choose "Standard 19200 bps Modem" - Next.
5.
Select COM port - Next - Finish, the screen will display the "standard 19200 bps
Modem" item.
6.
Press button "Properties", switch to Modem tap and select "Maximum Port
Speed" change speed from 19200 to 115200 - press ok.
7.
Switch to advanced tap, in extra setting textbox, input:at+cgdcont=1,"IP","inter-
net" - press ok.
8.
In the Network Connections Panel, Select Make New Connection.
9.
In the Make New Connection Dialogue, choose "Connect to the Internet" , then
click next.
10.
Choose "Set up my connection manually", then click next.
11.
Choose "Connect using a dial up modem", then click next.
12.
Input ISP Name (ex: GPRS) then click next.
13.
Do NOT input Phone number, User name and Password.
14.
In completing the new connection wizard textbox, select "Add a shortcut to this
connection to my desktop", then click Finish.
15.
In the Network Connections Panel, press right button of mouse then select
properties.
16.
In the "Phone number textbox, input:*99***1#, then click Configure.
23
TREK-753 User Manual
Advertisement
Table of Contents
