Running The Bios Setup Program; Installing The Drivers For Win Xp - Advantech TREK-753 User Manual

7" all-in-one mobile data terminal
Table of Contents

Advertisement

2.3 Running the BIOS Setup Program

In most cases, the computer will have been properly set up and configured by the
dealer or SI prior to delivery. However, it may still be necessary to adjust some of the
computer's BIOS (Basic Input-Output System) setup programs to change the system
configuration data, like the current date and time, or the specific type of hard drive
currently installed.
The setup program is stored in read-only memory (ROM). It can be accessed either
when turning on or resetting the computer, by pressing the "Del" key on the keyboard
immediately after powering up the computer.
The settings that are specified with the setup program are recorded in a special area
of the memory called CMOS RAM. This memory is backed up by a battery so that it
will not be erased when turning off or resetting the system. Whenever the power is
turned on, the system reads the settings stored in CMOS RAM and compares them
to the equipment check conducted during the power on self-test (POST). If an error
occurs, an error message is displayed on screen, and the user is prompted to run the
setup program.

2.4 Installing the Drivers for Win XP

After installing system software, the computer is ready to set up the Intel® chipset,
VGA, audio, LAN, and touch screen functions. All the pre-requisite drivers are stored
on a CD-ROM disc entitled "Drivers and Utilities" (Check the correct wording on the
CD, which can be found in the accessory box.)
The utility directory includes multimedia programs. Some drivers and utilities in the
CD-ROM disc have their own text files which help users install the drivers and under-
stand their functions.
These files are a very useful supplement to the information in this manual. For more
updated driver please refers to Advantech website, www.advantech.com/support
The drivers for TREK-753 are listed as below, please just execute the drivers for
installation.
Device
Intel SCH INF Update
Intel US15 GMA500 Graphic Driver
PenMount Universal Driver
Realtek RTL8111DL 10/100/1000 PCI-E NIC
Realtek ALC892 High Definition Audio
FTDI FT4232 BUS USB Driver
ublox LEA-5S Driver
Sierra Wireless MC5728V
Sierra Wireless MC8790V
Ralink RT3091 Wireless LAN Card (AW-NE768)
BT-203B Utility BlueSoleil (Optional)
Note!
The drivers and utilities used for the TREK-753 are subject to change
without notice. If you are in doubt, check Advantech's website or contact
our application engineers for the latest information regarding drivers and
utilities.
TREK-753 User Manual
Version
8.8.0.1011
6.14.11.1018
2.1.1.0
5.728.604.2009
5.10.0.5804
2.6.0.0
1.2.0.5
5.1.2535.0
6.20.0.7
1.4.2.1
2.1.3.0
12

Advertisement

Table of Contents
loading

Table of Contents