Display - Pioneer Elite VSX-39TX Operating Instructions Manual

Displays & Controls

Display

All the display information is explained and/or referenced here.
1
SIGNAL
SELECT OVER
ANALOG SP
DIGITAL
AC-3RF
AUTO
AC-3 DTS
C
L
LS S
1 SIGNAL SELECT indicators
Light to indicate the input signal you selected.
ANALOG : Lights when analog signals are
assigned.
DIGITAL : Lights when digital audio signals are
selected.
AC-3 RF : Lights when AC-3 RF signals are
assigned.
AUTO : Lights when the receiver is set to select
the input signal automatically.
2 Program Format indicators
AC-3 : Lights when a source with Dolby Digital
signals is played.
DTS : Lights when a source with DTS audio
signals is played.
For Dolby Digital or DTS sources : These
indicators change according to which channels
are active in the source. When all three LS (left
surround), S (surround) and RS (right surround)
light at the same time it means a source with
Surround EX or DTS-ES flag is being used.
L – Left front channel.
C – Center channel.
R – Right front channel.
LS – Left surround channel.
S – Surround channel (mono).
RS – Right surround channel.
LFE – Low Frequency Effects channel.
3 Analog level indicators
24
2 3 4 5 6 7
ATT LOUDNESS MIDNIGHT
H.P
AB
MONO STEREO
TUNED AMFM
R LFE
RS
15
8
9 10
DSP STEREO
PRO LOGIC
DIGITAL
14
OVER – When the source signal is analog, this
lights if the signal is in danger of distorting.
Press INPUT ATT on the front panel to lower
the signal level.
ATT – Lights when INPUT ATT is used to
reduce the level of the analog source signal.
4 Speaker indicators
Light to indicate the current speaker system, A
and/or B.
5 LOUDNESS indicator (See p.51)
Lights when the LOUDNESS mode is on.
6 H.P (headphones)
Lights when headphones are connected to the
PHONES jack (speakers systems A and B both
turn off automatically).
7 MIDNIGHT indicator (See p.50)
Lights when the MIDNIGHT LISTENING mode
is on.
8 DSP indicator (See p.43-47, 49)
Light when a DSP or Advanced Theater modes
are selected.
9 STEREO indicator
Lights when a STEREO modes are selected.
10 Radio Frequency/Function indicator
Displays the function or the frequency of the
current radio station.
11 12
VOLUME
dB
TAPE 2
13