Display - Pioneer Elite SC-07 Operating Instructions Manual

04 Controls and displays

Display

DIGITAL
ANALOG
STREAM DIRECT
2
THX
STEREO
SP
14
1 SIGNAL indicators
Light to indicate the currently selected input signal.
AUTO lights when the receiver is set to select the input
signal automatically (page 38).
2 Program format indicators
These change according to which channels are active in
digital sources.
L – Left front channel
C – Center channel
R – Right front channel
SL – Left surround channel
S – Surround channel (mono)
SR – Right surround channel
SBL – Left surround back channel
SB – Surround back channel (mono)
SBR – Right surround back channel
LFE – Low frequency effects channel (the ((( ))) indicators light when
an LFE signal is being input)
3 Digital format indicators
Light when a signal encoded in the corresponding format
is detected (DSDPCM lights during DSD (Digital
Stream Direct) to PCM conversion with SACDs).
4 S.RTRV
Lights when the Sound Retriever is switched on (page 96).
5 MULTI-ZONE
Lights when the MULTI-ZONE feature is active (page 66).
6 FULL BAND
Lights when the Full Band Phase Control is switched on
(page 13).
7 PHASE CONTROL
Lights when the Phase Control or Full Band Phase
Control is switched on (page 12).
8 Sound processing indicators
Light according to the active Audio parameter(s)
(page 96) and/or ANALOG ATT (page 99).
9 V.SB
Lights during Virtual surround back processing
(page 39).
10 TUNER indicators
TUNED – Lights when a broadcast is being received.
32
En
1 2 3
2
AUTO DIGITAL
L C R
DTS WMA9 Pro
PCM
SL S SR
AAC DSD PCM
HDMI
SBL SB SBR
CD
LFE
CD-R
eo
PRO LOGIC N : 6
ADV.SURROUND
STANDARD
AB
SLEEP
15 16 17 18
4 5 6 7
2HD
FULL BAND
ATT
MULTI-ZONE DIALOG E
S.RTRV SOUND Hi-Bit/Sampling
TV
TUNER DVD
PHONO BDP DVR
19
STEREO – Lights when a stereo FM broadcast is
being received in auto stereo mode.
MONO – Lights when the mono mode is set using MPX.
11 SOUND
Lights when any of the Midnight, Loudness or tone
controls feature is selected (page 96).
12 Master volume level
Shows the overall volume level. –80dB indicates the
minimum level, and +12dB indicates the maximum level.
13 SR+
Lights when the SR+ mode is switched on (page 71).
14 STREAM DIRECT
Lights when Direct/Pure Direct is selected (page 38).
15 Speaker indicators
Lights to indicate the current speaker system, A and/or B
(page 64).
16 Listening mode indicators
THX – Lights when one of the Home THX modes is
selected.
ADV.SURROUND – Lights when one of the
Advanced Surround modes has been selected.
STEREO – Lights when stereo listening is switched
on (see Listening in stereo on page 37).
STANDARD – Lights when one of the Standard
Surround modes is switched on (see Standard
surround sound on page 35).
17 SLEEP
Lights when the receiver is in sleep mode (page 99).
18 Matrix decoding format indicators
2PRO LOGIC IIx – This lights to indicate 2 Pro
Logic II / 2 Pro Logic IIx decoding (page 35).
Neo:6 – When one of the Neo:6 modes of the receiver
is on, this lights to indicate Neo:6 processing (page 35).
19 Character display
Displays various system information.
20 Input source indicators
Light to indicate the input source you have selected.
8 9 10 11 12
TUNED RDS
DNR
OVER STEREO EON
MONO
V.SB
dB
VIDEO HMG XM SR+
HDMI [ 1 ] [ 2 ] [ 3 ]
13
20