Multi Operation And System Off; Programming A Multi-Operation Or A Shutdown Sequence - Pioneer Elite SC-07 Operating Instructions Manual

Controlling the rest of your system

Multi Operation and System Off

The Multi Operation feature allows you to program a
series of up to 5 commands for the components in your
system. For example, you could turn on your TV, turn on
your DVD player and start playing the loaded DVD using
only two buttons on the remote control.
Similar to multi operations, System Off allows you to use
one button to stop and switch off a series of components
in your system at the same time.
Programming a multi-operation or a
shutdown sequence
Set the remote control operation mode selector switch to
RCV when you want to program this receiver's
operations, to SOURCE when you want to program
operations of other components.
MAIN MAIN
RECEIVER SOURCE
ZONE2 ZONE2 3 3
MULTI MULTI
OPERATION OPERATION
DVD DVD BD BD DVR1 TV DVR2 DVR1
VIDEO1 VIDEO1 VIDEO2 VIDEO2 VIDEO3 VIDEO3 DVR2 TV
HOME MEDIA HOME MEDIA
GALLERY GALLERY CD CD CD-R CD-R PHONO PHONO
HDMI HDMI TUNER TUNER XM XM SIRIUS SIRIUS
INPUT SELECT INPUT SELECT
1 While pressing MULTI OPERATION, press HOME
MENU.
The remote LCD display shows SETUP.
Use / to select MULTI OP or SYS OFF from the
2
menu and press ENTER.
If you selected Multi Operation (MULTI OP), the LCD on
the remote prompts you for an input source button.
If you selected System Off (SYS OFF), go to step 4.
3 Press the input source button for the component
that will start the multi-operation, then press ENTER.
For example, if you want to start the sequence by
switching on your DVD player, press DVD.
Use / to select CODE EDT, then press ENTER.
4
To erase any previously stored multi-operations (or
shutdown sequences) select CODE ERS above.
Use / to select a command in the sequence, then
5
press ENTER.
If this is the first command in the sequence, select 1ST
CODE. Otherwise, simply choose the next command in
the sequence. PRES KEY flashes after you press ENTER.
Note
1 • Before Multi Operation and System Off will work correctly, you must setup the remote to work with your TV and other components (see
Setting the remote to control other components on page 102 for more on this).
• Some units may take some time to power up, in which case multiple operations may not be possible.
• Power on and off commands only work with components that have a standby mode.
1
TV CONTROL
INPUT MUTE MUTE
AUDIO VIDEO
PARAMETER PARAMETER
TUNE
EXIT TOOLS
TOP MENU MENU
BAND T.EDIT
ST ENTER ENTER ST
CATEGORY
RETURN
HOME
MENU
TUNE
iPod CTRL
STATUS PHASE CTRL CH LEVEL
THX MPX MEMORY
6 If necessary, press the input source button for the
component whose command you want to input.
This is only necessary if the command is for a new
component (input source).
7 Select the button for the command you want to
input.
The following remote control commands can be selected:
MAIN
RECEIVER SOURCE
ZONE2 3
MULTI
OPERATION
DVD BD DVR1 DVR2
VIDEO1 VIDEO2 VIDEO3 TV
HOME MEDIA
GALLERY CD CD-R PHONO
HDMI TUNER XM SIRIUS
INPUT SELECT
SOURCE
TV RCV
CH VOL
VOL
TV CONTROL
INPUT MUTE MUTE
AUDIO VIDEO
• You don't need to program the receiver to switch on
or off. This is done automatically.
With Pioneer components, you don't need to:
• program the power to switch off in a shutdown
sequence (except DVD recorders);
• program the power to switch on if it's the source
component selected in step 3;
• program a Pioneer TV or monitor to switch on if the
input function (selected in step 2) has video input
terminals;
These take priority in multi operations (not shutdown).
8 Repeat steps 5 to 7 to program a sequence of up to
five commands.
When you're finished, use / to select EXIT from
9
the menu and press ENTER.
You will return to the remote control Setup menu. Select
* EXIT * again to exit.
AUDIO VIDEO
PARAMETER PARAMETER
TUNE
EXIT TOOLS
TOP MENU MENU
BAND T.EDIT
ST ENTER ST
CATEGORY
RETURN
HOME
MENU
TUNE
iPod CTRL
STATUS PHASE CTRL CH LEVEL
THX MPX MEMORY
AUTO/ STEREO/
DIRECT A.L.C. STANDARD ADV SURR
PGM
BD MENU
SIGNAL SEL SLEEP DIMMER AUDIO
SR+ SBch MCACC
DISP
A.ATT GENRE HDMI OUT
CH
D.ACCESS CLASS
ENTER
CLR
14
105
En