Maintenance And Cleaning; Maintenance Menu - Krups EA9010 Service Manual

KRUPS
SERIE EA9000
8

MAINTENANCE AND CLEANING

8.1 Maintenance menu

n
Press the Maintenance tab to access the Maintenance menu.
n
Automatic cleaning of the steam nozzle
The machine can automatically clean the nozzle on your request, or automatically.
Automatic cleaning is required depending on the number and type of milk recipes prepared.
Below are the main steps in this automatic cleaning when requested by the user. Otherwise, just follow
the instructions on the screens displayed by the machine.
You can access the "Maintenance" menu from the main menu by
n
pressing the "Maintenance" tab.
Press the "Automatic cleaning of the nozzle" button on the touch screen.
n
NB: The cleaning cycle must not be interrupted.
n
To quit the "Maintenance" menu, press the "Maintenance" tab.
n
1
If necessary, the machine will ask you to replace the cleaning liquid
n
bottle.
Press Start.
n
(if you do not do so immediately, you will return to the initial screen).
The machine starts by rinsing the nozzle.
n
The nozzle comes out of its cleaning container.
n
The cleaning liquid is introduced automatically into the nozzle cleaning
n
container.
2
The machine mixes water with the cleaning liquid.
n
Then, the machine cleans the nozzle by soaking it in this mixture.
n
The nozzle is then rinsed twice with water.
n
The cleaning cycle is finished
n
n
Manual cleaning of the steam nozzle
The machine can ask you to clean the nozzle manually or can clean it on your request. Manual cleaning
is requested depending on the number and type of milk recipes prepared.
Below are the main steps in this manual cleaning of the nozzle when requested by the user. Otherwise,
just follow the instructions on the screens displayed by the machine.
36
You can access the "Maintenance" menu from the main menu
n
by pressing the "Maintenance" tab.
To clean the nozzle and its container, you must follow the sequence
n
shown in the Maintenance tab.
1
Failure to follow this sequence may damage the system.
n
Press the "Manual cleaning of the nozzle" button on the touch screen.
n
To quit the "Maintenance" menu, press the "Maintenance" tab.
n
The nozzle comes out of the cleaning container.
n
You can clean all of the parts of the machine located behind the coffee
n
nozzle.
2
Remove the two drip trays.
n
Empty and clean them.
n
The nozzle moves forward and slightly downward.
n
3
Unscrew the nozzle tip (10) with the steam nozzle (9).
n
Do not remove the tip seals, as this may damage them and affect the
n
frothing performance.
4
!
Caution: Risk of scalding while unscrewing; the temperature of the nozzle can be high (> 50°C).
Clean the three holes on the nozzle tip using the pin supplied for this
n
purpose with the Welcome Pack. You must fully separate the two
parts to clean them properly.
Do not wash the tip in the dishwasher.
n
Caution: clean the tip properly.
n
5
Press the "OK" button.
n
ENGLISH
37