Replacing Remote Control Battery - LG RCB-100 User Manual

How to Use
Receiving Call
- When the mobile phone rings, press the Select button of the remote control once
shortly. The default is speakerphone.
Notifying Mobile Phone Location
- This function helps to find a mobile phone when the remote control is connected to
a mobile phone.
- Press the Select button on the remote control five times shortly, the mobile phone
rings through its speakerphone and also vibrates.
Note: It may not work properly if the distance between the remote control and mobile
phone is over 10 m, or the connection is lost since the Bluetooth signal between
them is weak due to the wireless environment conditions.
Low Battery
- If a mobile phone is connected to the remote control and only the red indicator is
blinking when you press the Select key, it means the battery level is low.
- Replace the battery with a CR2032 battery.

Replacing Remote Control Battery

- Remove the battery cover using a coin.
- Remove the battery from the remote control.
- Insert a new CR2032 battery with its positive pole (+) upward.
- Put the battery cover back on the remote control and tighten it using a coin.
Note: The usage duration of RCB-100 may depend on the frequency of use.
6
Open
열림
Place the positive polarity
(+) upward.
Open
Close