Table of Contents
Advertisement
Function
Pairing mode
Operation mode
Low power
notification
Problem
Check if the LED turns on
Power fault
during the button operation.
Check if the RCB-100 is
under the pairing mode.
Not connected
to a mobile
Check if a mobile phone
phone
supports the wireless remote
control function.
Function not
Check the connection to a
work
mobile phone.
Status
Power on
Connected to a mobile
phone
Not connected to a mobile
phone
Power on
Inspection
Status Indicator
Operation
The red and green LEDs are
blinking in turn.
The green LED is blinking when
using buttons.
The red and green LEDs are
blinking shortly when using buttons.
The red LED is blinking when
using buttons.
Q&A on Troubleshooting
Troubleshooting
Replace the battery or insert it in a
correct direction.
Press and hold the Select button for
6 seconds to switch the RCB-100 to
the paring mode.
Refer to the user manual of the
mobile phone and check if a mobile
phone supports the wireless remote
control function.
If the green and red LEDs are
blinking once in turn when using
buttons, it means the connection is
lost. Try to connect again.
Keep 10 meters distance when
connecting RCB-100.
7
Advertisement
Table of Contents
