Chain Connection; Configurations And Operating Conditions - Casio DT-930 Hardware Manual

7.10. Chain Connection

7.10.1. Configurations and Operating Conditions

Satellite Cradle and Host P/C (with external device connected)
HOST PC
MODEM
Serial
Printer
DIP Switch Setting
Table 7.8
No.
1 Baud rate
switching 0
2 Baud rate
switching 1
3 Mode
switching 0
4 Mode
switching 1
5 Termination
switching
6 Baud rate
switching 0
7 Baud rate
switching 1
8 Baud rate
switching 2
9 Flow control 0
10 Flow control 1
Notes:
1. This baud rate must be reduced if the line quality is poor.
2. Make the appropriate DIP switch settings for the connected PC.
RS-232C
115.2 Kbps (max)
Fig. 7.2
Use of Switch
DT-930 and
Cradle
DT-930 and
Cradle
Cradle and P/C
Cradle and P/C
Cradle and P/C
40
DT-930
Satellite Cradle
Active operation
IR Comm.
115.2 Kbps (max)
Destination
To GA/to CPU PB6
To GA/to CPU PB7
To GA/to CPU PA13
To GA/to CPU PA14
To GA/to CPU PA15
To CPU PB0
To CPU PB1
To CPU PB2
To CPU PB3
To CPU PB5
Switch Setting
IRSPEED0 ON
IRSPEED1 OFF
MODE0 OFF
MODE1 OFF
ENDSW ON
PCSPEED0 Note 2
PCSPEED1
PCSPEED2
FLOWSEL0
FLOWSEL1
Remark
115.2Kbps
Note 1
Active
operation