Compliance; 6.10. Chain Connection; 6.10.1. Configurations And Operating Conditions - Casio DT-930 Hardware Manual

6.9.

Compliance

Table 6.7
Radio interference
Electromagnetic
compatibility
generic immunity
Safety

6.10. Chain Connection

6.10.1. Configurations and Operating Conditions

Basic Cradle and Host P/C (with external device connected)
HOST PC
DIP Switch Setting
Table 6.8
No. Use of Switch
1 Baud rate switching 0
2 Baud rate switching 1
3 Baud rate switching 2
4 RS
5 ER
6 Chain termination setting
7 Use of chain connection
Note:
This baud rate must be reduced if the line quality is poor.
Standard
EN55022:1994, A2:1997 Class B
CISPR Pub.22:1993, A2:1996 Class B
EN50082-1: 1997
EN60950
RS-232C
115.2 Kbps (max.)
Fig. 6.2
Destination
To GA
To GA
To GA
To GA
To GA
To RS-485 LINE
To GA
25
Tested with DT-9020ADP-G.
Tested with DT-9020ADP-G.
Applicable to DT-9020ADP-G
and DT-9020ADP-U.
DT-930
Basic
Cradle
IR communication
115.2 Kbps (max.)
Switch Setting
IRSPEED0 ON
IRSPEED1 OFF
IRSPEED2 ON
RS OFF
ER OFF
ENDSW ON
RS-485 ON
Remark
Remark
115.2 Kbps
See note.