Casio DT-930 Hardware Manual page 41

Master Cradle, Satellite Cradle and Host P/C
HOST PC
Connecting
route
DIP Switch Setting
Table 7.9
No. Use of Switch
1 Baud rate DT-930 and
switching 0 Cradle
2 Baud rate DT-930 and
switching 1 Cradle
3 Mode
switching 0
4 Mode
switching 1
5 Termination
switching
6 Baud rate Cradle and
switching 0 P/C
7 Baud rate Cradle and
switching 1 P/C
8 Baud rate Cradle and
switching 2 P/C
9 Flow control 0
10 Flow control 1
Notes:
1. This baud rate must be reduced if the line quality is poor.
2. This setting is invalid during passive operation.
DT-930
Master Cradle Satellite Cradle
RS-422
Modular cable
IR comm.
115 Kbps
Fig. 7.3
Destination
To GA/to CPU PB6
To GA/to CPU PB7
To GA/to CPU
PA13
To GA/to CPU
PA14
To GA/to CPU
PA15
To CPU PB0
To CPU PB1
To CPU PB2
To CPU PB3
To CPU PB5
41
DT-930
Satellite Cradle
RS-422
Modular cable
Passive operation
IR comm.
115 Kbps
Setting
Switch
In
middle
IRSPEED0 ON
IRSPEED1 OFF
MODE0 ON
MODE1 OFF
ENDSW OFF
PCSPEED0 Do not care
PCSPEED1
PCSPEED2
FLOWSEL0
FLOWSEL1
DT-930
Passive operation
IR comm.
115 Kbps
Remark
At end
ON 115.2Kbps
OFF Note 1
ON Passive
Operation
OFF
ON
Note 2