Connecting An Additional Amplifier - Pioneer A9 Operating Instructions Manual

06 Other connections
Caution
• Make sure you don't switch off the
computer or unplug the USB cable during
playback.
• To prevent noise being output, don't use
other software on your computer during
playback.
• Pioneer is not responsible for computer
system damage, software crashes or
failures, or any other possible computer
problems due to this configuration.
®
Microsoft , Windows
Millennium Edition, Windows
either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
22
En
® ®
XP, Windows 2000, Windows
®
98, and Windows NT
Connecting an additional
amplifier
This receiver has more than enough power for
any home use, but it's possible to add an
additional amplifier using the pre-outs. Make
the connections shown below to add an
amplifier to power your speakers.
• Before making or changing the
connections, switch off the power and
disconnect the power cord from the AC
outlet.
®
®
are
FM UNBAL
75
12V
TRIGGER
Stereo amplifier
ANTENNA
XM IR
AM LOOP
USB
IN
AUDIO IN
IN OUT
L
R
REC PLAY
MM/MC
OUT IN
PRE
TAPE AUX1 AUX2 CD
OUT
This receiver
INPUT
R
ANALOG
CONTROL
OUT
SIGNAL
GND
L
R
PHONO
L