Making An Audio Recording - Pioneer A9 Operating Instructions Manual

04 Listening to your system

Making an audio recording

You can make an audio recording from any
audio source connected to the receiver.
1 Select the source you want to record.
Use the input select buttons (INPUT
SELECTOR).
2 Prepare the source you want to record.
Tune to the radio station, load the CD, set up
the turntable, etc.
3 Prepare the recorder.
Insert a blank tape, MD, etc. into the recording
device and set the recording levels.
Refer to the instructions that came with the
recorder if you are unsure how to do this.
4 Start recording, then start playback of the
source component.
Note
1 The receiver's volume, balance and tone controls have no effect on the recorded signal.
16
En
1