JVC TH-M606 Service Manual page 9

3.1.2 Removing the front panel assembly
(See Figs.5 and 6)
• Prior to performing the following procedures, remove the metal
cover.
(1) From the top side of the main body, disconnect the parallel
wires from the connectors (CN456, CN457) on the main
board. (See Fig.5)
(2) Disconnect the card wi res from the connectors (CN450,
CN460) on the main board. (See Fig.5)
(3) Remove the screw C attaching the earth wire to the main
board. (See Fig.5)
Reference:
When attaching the screw C, attach the eart h wire with
it. (See Fig.5)
(4) From the bottom side of the main body, remove the three
screws D attaching the front panel assembly. (See Fig.6)
(5) From the both and bottom sides of the main body, remove
the front panel assembly in the direction of the arrow while
releasing the joints b and c. (See Fig.6)
Main board CN456 CN450
Card wire
Front panel assembly
Fig.5
Joint b Joint c
Front panel assembly
Fig.6
CN457
CN460
C
Earth
wire
Parallel wires
Card wire
Joint b
D
(No.MB198)1-9