3G Settings - Ematic FunTab User Manual

CAUTION: Do not insert and remove the USB device repeatedly
in a short time, as this may cause damage to the device.

3G Settings

NOTE: A 3G wireless network card (purchased separately) is
required to connect to a 3G network.
The following is a list of 3G network specifications compatible with your
device:
Channel Access Method
TD-CDMA
WCDMA
CDMA2000
To connect to a 3G wireless network:
1 Insert the USB connector of the 3G wireless network card into the
USB interface.
2 Observe the bright lights on the 3G wireless network card, which
indicate the card is receiving power and is ready to begin
connection to the 3G network.
3 Tap the 3G Settings application icon
4 Tap Add 3G network.
5 Enter a Name for the 3G network in the name field of the pop-up
dialog box.
6 Observe that the network device field is selected for you by the
tablet.
7 Enter the Device number and APN, which are available from
Network Device
TD368
HUA WEI E220
HUA WEI E230
HUA WEI E160X
HUA WEI E169G
HUA WEI E1750
Bora 9380
AWIT-U8
.
Setup | 12