3G Network Settings; Ethernet Network Settings - Ematic EGS109 User Manual

1. Will be 3 G wireless card through the conversion line into USB interface
2. Into the machine "Settings" under a "wireless and network", will be closed
Wifi option, Wifi and 3 G not used at the same time.
Note
1. Due to the different communication systems 3 G equipment is more, this
machine is 3 G function can't ensure that is compatible with all the outer 3 G
equipment.
2. 3 G equipment should be due to external from the machine to the USB
interface take electricity, so in 3 G connection, please ensure that the battery power in
one case above.
1. Into the machine "Settings" under a "wireless and network", will be closed wifi
options.
2. Will USB Ethernet card through the special OTG line connected to the machine to
the USB interface, the system will automatically recognize and attached to the
network.
3. Into the machine "Settings" under the "Ethernet Settings" project and check the ""
Ethernet" option can.
4. If you need to specify the etheric network IP and gateway, can enter the "Ethernet

3G network Settings

Ethernet network Settings

30