Av Connector Out; S-Video Out; Language Settings; Audio Language - Pioneer S-DV99ST Operating Instructions Manual

Initial Settings menu

AV Connector Out

You only need to make this setting if you
connected this system to your TV using the AV
SCART-type connector.
• Default setting: Video
• If you make a setting here that is incom-
patible with your TV, the TV may not
display any picture at all. If this happens
switch everything off and reconnect to the
TV using the supplied audio/video cable.
• SCART cables come in various configura-
tions. Make sure you use the correct one
for your TV/monitor. See page 77 for the
SCART pin assignment diagram.
Initial Settings
Video Output TV Screen
Language AV Connector Out
Display

S-Video Out

Options
• Video – Standard video, compatible with
all TVs.
• S-Video – Higher quality, but check your
TV for compatibility.
• RGB – Best quality, but check your TV for
compatibility.
S-Video Out
You only need to make this setting if you
connected this system to your TV using an
S-video cable.
• Default setting: S2
• If you find that the picture is stretched or

Language settings

Video

Audio Language

S-Video
RGB
• Default setting: English
This setting is your preferred audio language
for DVD-Video discs. If the language you
specify here is recorded on a disc, the system
automatically plays the disc in that language.
The DVD-Video format recognizes 136
different languages. Select Other Language
if you want to specify a language other than
those listed. See also Selecting languages
using the language code list on page 88.
Initial Settings
Video Output
TV Screen
Language
AV Connector Out
Display
S-Video Out
Options
distorted on the default S2 setting, try
changing it to S1.
Initial Settings
Video Output Audio Language
Language Subtitle Language
Display DVD Menu Lang.
Options Subtitle Display
11
S1
S2
English
French
German
Italian
Spanish
Other Language
65
En