Initial Settings Menu; Using The Initial Settings Menu; Video Output Settings; Tv Screen - Pioneer S-DV99ST Operating Instructions Manual

11

Initial Settings menu

Chapter 11
Initial Settings menu
Using the Initial Settings
menu
The Initial Settings menu gives you complete
control in setting up your DVD system,
including video output settings and parental
lock settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1 Press HOME MENU and select 'Initial
Settings' from the on-screen display.
Play Mode
Initial Settings
2 Select the setup category from the list
on the left, then select an item from the
menu list to the right.
3 Make the setting you want.
• The language options shown in the on-
screen display illustrations on the
following pages may not correspond to
those available in your country or region.
64
En
HOME MENU
DVD
Video Adjust
Disc Navigator

Video Output settings

TV Screen

• Default setting: 16:9 (Wide)
Initial Settings
Video Output TV Screen
Language
AV Connector Out
Display S-Video Out
Options
If you have a widescreen TV, select the 16:9
(Wide) setting—widescreen DVD software is
then shown using the full screen area. When
playing software recorded in conventional
(4:3) format, the settings on your TV will
determine how the material is presented—
see the manual that came with your TV for
details on what options are available.
If you have a conventional TV, select either 4:3
(Letter Box) or 4:3 (Pan & Scan). In Letter
Box mode, widescreen software is shown with
black bars at the top and bottom of the
screen. Pan & Scan chops the sides off
widescreen material to make it fit the 4:3
screen (so even though the image looks
larger on the screen, you're actually seeing
less of the picture). See also Screen sizes and
disc formats on page 88.
4:3 (Letter Box)
4:3 (Pan&Scan)
16:9 (Wide)