Pioneer YPM-MG2196ZF Service Manual page 69

7 Mechanism Lock
a)Mechanism lock operation is to push the mechanism
downward and toward the disc slot in order to keep
the mechanism at the correct position during disc
insertion/ejection, and to leave the appropriate gap
above the mechanism.
b)The Cam gear rotates to move the Mech lock lever
toward the rear of the Mechanism. The lever pushes
the inside surface of the product. It causes the mech-
anism to move forward.
Mech lock lever (left)
Mech lock junction
lever
8 Door Open
a)The Door open lever pushes the door on the product
grille to open it.
b)The Cam gear rotates to move the door arm. Then,
the door arm moves the door lever.
c)The door lever moves the door open lever via the
buffer spring.
d)When the door switch is turned ON, the Cam gear
motor stops rotating.
Mech lock lever
c)With the movement of the Mech lock lever, the Mech
lock lever (right) moves in a slanting direction as indi-
cated by the arrow in Fig. 25 to push the mechanism
forward and downward.
d)The Mech lock lever (left) is driven by the movement
of the Mech lock lever via the Mech lock junction
lever to push the Mechanism downward.
e)The mechanism lock is released only in the disc
clamp mode.
Mech lock lever (right)
Fig. 25
Door switch
Cam gear
YPM-MG2196ZF
Door lever
Door open lever
Fig. 26
69