Pioneer YPM-MG2196ZF Service Manual page 45

8. Loosen the 2 screws. Remove the plate spring and
the rack.
9. Pull out the feed screw from the Pickup unit.
- How to remove the Carriage Motor Assy
1. Loosen the 2 screws (A). Remove the Carriage
motor assy.
- How to remove the Spindle Motor Assy
1. Remove the connector.
2. Loosen the 2 screws (B). Remove the Spindle motor
assy.
- How to remove the Cam gear motor and ELV
motor
1. Insert a short pin into the Pickup flexible PCB.
(See Fig. 3)
Remove the Cover from the Side PCB. (See Fig. 3)
Disconnect the flexible PCBs from the connectors
CN863 and CN864. (See Fig. 3)
2. Disconnect the the flexible PCB (Motor PCB(A)) from
the connector CN862 on the Side PCB.
3. Disconnect the flexible PCB from the connector
CN861 to the CD core unit.
4. Loosen the 2 screws (A). Remove the Side PCB.
5. Loosen the screw (B). Remove the flexible PCB hold-
er.
6. De-solder at the 4 portions (C). Remove the Motor
PCB(A)
Grease (Yellow:
PG-641)
Feed screw
Pickup
unit
Carriage motor
assy
Motor PCB(A)
Flexible holder
YPM-MG2196ZF
Plate spring
Rack
Grease (White: KD-1)
Grease (Yellow:
PG-641)
Fig. 7
Spindle motor
assy
Fig. 8
Front
Side PCB
to CD core unit
Fig. 9
45