Screen Scroll Operation; Map Configurations - Toyota Corolla Manual

2. MAP SCREEN OPERATION AND MAP ICONS
SCREEN SCROLL
OPERATION
When any point on the map is select-
ed, that point moves to the centre of
the screen and is shown by the cursor
mark .
If a finger is continuously held on the
screen, the map will continue scrolling in
that direction until the finger is removed.
A street name or geo-coordinates of the
selected point will be shown, depending
on the scale of the map.
After the screen is scrolled, the map
remains centred at the selected location
until another function is activated. The cur-
rent vehicle position mark will continue to
move along your actual route and may
move off the screen. When
selected, the current vehicle position mark
returns to the centre of the screen and the
map moves as the vehicle proceeds along
the designated route.
When the scroll feature is used, the cur-
rent vehicle position mark may disappear
from the screen. Select
the current vehicle position on the map
screen.
When "Go" is selected, the starting
route guidance screen is displayed.
(→P.186)
When "Save" is selected, the point is
registered in the "Stored" list on the "My
destinations" screen. (→P.200)
168

MAP CONFIGURATIONS

CHANGING MAP SCALE
1
Select the zoom bar button.
2
Select "+" or "-" to change the scale of
the map screen.
The scale of the map screen can also be
changed the following ways:
• Selecting the desired scale point.
• Dragging the scale bar marking to the
is
desired point.
• Turning the tune/scroll knob.
INFORMATION
●
The scale range is from 150 ft to 250
miles (10 m to 500 km).
●
The scale has been changed, the new
to display
scale indicator will be displayed for a
while.