Toyota Corolla Manual page 129

Once you have connected the Bluetooth
device, it is automatically connected
whenever the engine switch is in the fol-
lowing status.
Vehicles without smart entry & start sys-
tem
The engine switch is turned to the "ACC"
or "ON" position.
Vehicles with smart entry & start system
The engine switch is turned to ACCESSO-
RY or IGNITION ON mode.
INFORMATION
●
For details on device detection and the
operation of your Bluetooth
the manual that
®
Bluetooth device.
●
The music profiles the paired device
supports can be connected individually
as desired. Some devices do not allow
individual profiles to be connected. In
that case, a pop-up window is displayed.
®
®
device, see
comes with the
■
PAIRING FROM THE DEVICE
1
Select "Make system discoverable".
When another Bluetooth
nected
To disconnect the Bluetooth
select "YES".
When 4 Bluetooth
ready been paired
A paired device needs to be replaced.
Select "OK", and select the device to be
replaced.
2
When this screen is displayed, search
for the device on the screen of your
®
Bluetooth device.
To cancel the registration, select "Can-
cel".
3
Pairing the Bluetooth
®
your Bluetooth
A PIN code is not required for SSP
(Secure Simple
®
Bluetooth devices. Depending on the
type of Bluetooth
nected a message confirming registration
may be displayed on the Bluetooth
device's screen. Respond and operate the
®
Bluetooth device according to the confir-
mation message.
1. SETUP OPERATION
®
device is con-
®
device,
®
devices have al-
®
device using
device.
Pairing) compatible
®
device being con-
129
5
®