Toyota Corolla Manual page 121

Once you have connected the Bluetooth
device, it is automatically connected
whenever the engine switch is in the fol-
lowing status.
Vehicles without smart entry & start sys-
tem
The engine switch is turned to the "ACC"
or "ON" position.
Vehicles with smart entry & start system
The engine switch is turned to ACCESSO-
RY or IGNITION ON mode.
INFORMATION
●
For details on device detection and the
operation of your Bluetooth
the manual that
®
Bluetooth device.
●
The music profiles the paired device
supports can be connected individually
as desired. Some devices do not allow
individual profiles to be connected. In
that case, a pop-up window is displayed.
®
®
device, see
comes with the
RECONNECTING Bluetooth
DEVICE
®
If a Bluetooth device is disconnected
due to poor reception from the
®
Bluetooth network when the engine
switch is in the following status, the
system will automatically reconnect
®
the Bluetooth device.
Vehicles without smart entry & start
system
The engine switch is turned to the
"ACC" or "ON" position.
Vehicles with smart entry & start sys-
tem
The engine switch is turned to ACCES-
SORY or IGNITION ON mode.
®
If the Bluetooth device is disconnected
on purpose, such as it was turned off, this
does not happen. Reconnect it manually
using either of the following methods:
• Select a Bluetooth
(→P.124)
• Connect the audio profile/phone profile.
(→P.124)
1. SETUP OPERATION
®
®
device again.
121
5