Hafele nagold J34 CST Operation Manual page 18

1 . Auto Scale Removal Function 2
For best cleanin ng results, w
for des s caling stea am microwav
Run n steam prog grams on my
1) Power up the system, remove the water tank, inject 1000ml of fresh water into the
water tank, adding a pack of descaling agent.
2) Push the tank into the furnace where appropriate.
3) In standby mode, press "
mode d01, default weight 0.10, corresponding cooking time and " Kg ""Min" light up.
4) Press "
R emoval function. "Min" and defaul
water level ( Water, lack of water, full of water ), other icons disappear.
5) Press " " to start the program.
6) Stay whole 1 minute after the program has finished, take out the water tank and pour
the water in the tank. Thoroughly clean the water tank.
7 ) Replace the fresh water, repeat steps 3 to 6.
Note : the desca aling process
end, the entire
we recomme end that you
ve oven. Fo
y computer t today after 2
"button, the display "
" repeatedly, when " CLE " indicator lighten t means to enter Scale
t time " 20:00 " lighten, tank icon show the current
s shall not b be shut down
prog gram must b be started fro
use deterge
llow the man nufacturer's
0 hours, th
n. If the desc
om s tep 3 .
18
ent sodium c citrate,which
instructions on the pack
e need for d descaling.
" lights, display diaplays default
, i
caling proce ess shut dow
h were randomly o
kaging.
wn before the