Page 1
Cutter MODEL 4101RH 003504 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 national law, electric equipment that 8JD, ENGLAND have reached the end of their life Responsible manufacturer: must be collected separately and Makita Corporation Anjo Aichi Japan returned environmentally compatible recycling facility.
GENERAL SAFETY RULES GEA001-3 WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.
19. Store idle power tools out of the reach of chil- the manner intended for the particular type of dren and do not allow persons unfamiliar with power tool, taking into account the working con- the power tool or these instructions to operate ditions and the work to be performed.
FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Portable residual current device 005151 Connect the tool to a power supply and test the Portable Residual Current Device (PRCD) before using the tool.
Page 6
Loosen the wing bolt on the depth guide and move the base so that the end of 003516 the blade case is above the red line on the depth guide. Then tighten the wing bolt to secure the base. NOTE: •...
Page 7
BE SURE TO TIGHTEN THE HEX SOCKET HEAD BOLT SECURELY. CAUTION: • Use only the Makita wrench to install or remove the wheel. 1. Inner flange 2. Diamond wheel 3. Outer flange 4. Hex socket head bolt...
OPERATION Adjust the amount of water flow. Hold the tool firmly. Set the base plate on the 003545 workpiece to be cut without the wheel making any contact. Then turn the tool on and wait until the wheel attains full speed. Now simply move the tool for- ward over the workpiece surface, keeping it flat and advancing smoothly until the cutting is completed.
Page 9
CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.