ENGLISH (Original instructions) SPECIFICATIONS Model 4101RH Wheel diameter 125 mm Max. wheel thickness 2.1 mm 90° 41.5 mm Max. cutting capacities 45° 26 mm Max. permitted pressure of water supply 0.14 MPa Rated speed (n) / No load speed (n...
Page 3
Avoid body contact with earthed or grounded EC Declaration of Conformity surfaces such as pipes, radiators, ranges and Makita declares that the following Machine(s): refrigerators. There is an increased risk of Designation of Machine: electric shock if your body is earthed or grounded.
Page 4
14. Remove any adjusting key or wrench before parts. This will ensure that the safety of the power turning the power tool on. A wrench or a key left tool is maintained. attached to a rotating part of the power tool may 26.
Page 5
Wear personal protective equipment. depending on direction of the wheel’s movement at the Depending on application, use face shield, point of pinching. Abrasive wheels may also break under safety goggles safety glasses. these conditions. appropriate, wear dust mask, hearing Kickback is the result of power tool misuse and/or incorrect operating procedures or conditions and can be protectors, gloves and shop apron capable of stopping...
j) Use extra caution when making a “pocket FUNCTIONAL DESCRIPTION cut” into existing walls or other blind areas. The protruding wheel may cut gas or water pipes, electrical wiring or objects that can cause kickback. CAUTION: 17. Before using a segmented diamond wheel, Always be sure that the tool is switched off and •...
Page 7
Switch action CAUTION: 003529 Before plugging in the tool, always check to see • CAUTION: that the switch trigger actuates properly and Use only the Makita wrench to install or remove the • returns to the "OFF" position when released. wheel.
CAUTION: Installing water pipe This tool should only be used on horizontal • 1. Wing bolt surfaces. 2. Blade case Be sure to move the tool forward in a straight line • 3. Water pipe and gently. Forcing and exerting excessive pressure or allowing the wheel to bend, pinch or twist in the cut can cause overheating of the motor and dangerous kickback of the tool.
Only use accessory or 2. Screw attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Diamond wheels • Hex wrench 5 • Wrench 22 •...