JVC KD-R400J Service Manual page 20

4.4 Error code
4.4.1 Mechanical Error Detail Codes
Condition
LOADING Error
B1 time out
C1 time out
B2 time out
EJECT Error
B1 time out
C2 time out
B2 time out
FORCE EJECT Error
E1 FORCE EJECT ERROR When detect abnormal SW from the state of NO DISC
E2 FORCE EJECT ERROR When detect abnormal SW from the state with DISC
E3 FORCE EJECT ERROR When detect abnormal SW from the initial state.
E5 FORCE EJECT ERROR When detect abnormal SW from the state that half DISC is
E7 FORCE EJECT ERROR When detect abnormal SW from the state that DISC is in the
E8 FORCE EJECT ERROR When receive Force EJECT key after it makes an error from
E9 FORCE EJECT ERROR When receive Force EJECT key after it makes an error from
Error in Running mode
Case 1
Case 2
4.4.2 Disc error code
Condition
TOC READING Error
1'st track access Error
Last track access Error
NODISC judgement
NO DISC with start failure
Stopped with no playback
Logical format NG
1-20 (No.MA430<Rev.001>)
Error without SW change in LOAD when time-out is done
When there is no change in the state of the switch from the
state with DISC forward.
When there is no change in the state of the switch from the
state that DISC is drawn in a half.
When there is no change in the state of the switch from the
state that DISC is in the interior.
Error without SW change in EJECT when time-out is done.
When there is no change in the state of the switch from the
state that DISC is in the interior.
When there is no change in the state of the switch from the
state that DISC is drawn in a half.
When there is no change in the state of the switch in EJECT
from initial LOAD ERROR.
Transition to Force EJECT waiting or Force EJECT transition
from error Error by abnormal SW.
forward in LOAD.
drawn in LOAD and EJECT.
interior in LOAD and EJECT.
Force EJECT.
LOAD error or EJECT error.
When DISC was extracted or fall in EJECT END and
EJECT START.
When DISC is pushed in EJECT END.
When it hasn't completed CD TOC reading.
It doesn't end even if the first track access passes 30sec after
the TOC reading ends in the running mode.
It doesn't end even if the last track access passes 30sec after
the first track ends in the running mode.
It be judged NODISC.
Not possible to start.
When it was stopped in playback in the running mode.
Analysis of logical format is impossible or it does not
correspond to logical formats.
Details
Details
Error Code Detail Code
09 0011
09 0012
09 0015
01 0023
01 0026
01 0027
01 0041
01 0042
0043
01 0045
01 0047
01 0048
01 0049
09 0031
09 0032
Error Code Detail Code
84 0059
80 0060
80 0061
80 0090
80 0091
80 0093
80 0094