HTZ363DVD_EN_WL.book 48 ページ 2007年2月3日 土曜日 午後3時13分
10
Additional information
Message
EEP ERR
EXIT
Resetting the system
Use the front panel controls to reset all system
settings to the factory default.
With the system on, press STANDBY/
•
ON while holding down USB.
The next time you switch on, all the system
settings should be reset.
48
En
Description
• Contact your Pioneer authorized service center or your dealer for servicing.
• Appears when a menu is automatically exited after a set period of inactivity.
Using the language code list
Some of the language options (see Language
settings on page 30) allow you to set your
preferred language from any of the 136
languages in the Language code list below.
1
Select 'Other Language'.
Use / to select either a code letter or
2
a code number.
Use / to select a code letter or a code
3
number.
See the Language code list below for a
complete list of languages and codes.