Improving Poor Fm Reception; Reducing Am Reception Noise; Memorizing Stations; Listening To Station Presets - Pioneer XV-DV363 Operating Instructions Manual

HTZ363DVD_EN_WL.book 14 ページ ２００７年２月３日 土曜日 午後３時１３分
02 Getting started

Improving poor FM reception

If you're listening to an FM station in stereo but
the reception is weak, you can improve the
sound quality by switching to mono.
1 Tune to an FM radio station then press
SHIFT+SETUP.
Use / to choose FM MODE then press
2
ENTER.
Use / to select FM MONO then press
3
ENTER.
The mono indicator (
is in mono reception mode.
Select FM AUTO above to switch back to auto-
stereo mode (the stereo indicator (
when receiving a stereo broadcast).

Reducing AM reception noise

If AM reception seems particularly poor, or the
AM radio station you're listening to seems
noisy, try using the Noise Cut feature for better
sound quality.
1 Tune to an AM radio station then press
SHIFT+SETUP.
Use / to choose NOISECUT then press
2
ENTER.
Use /to select the noise cut mode
3
then press ENTER.
Select an effect level between 1 and 3.

Memorizing stations

You can save up to 30 station presets so that
you always have easy access to your favorite
stations without having to tune in manually
each time.
1 Tune to an AM or FM radio station.
Select mono or auto-stereo reception (FM) or
the Noise Cut mode (AM) as necessary. These
settings are saved along with the preset.
Press SHIFT+SETUP and use / to
2
choose 'ST.MEM.' then press ENTER.
14
En
) lights when the tuner
) lights
Use / to select the station preset you
3
want then press ENTER.

Listening to station presets

1 Make sure the TUNER function is
selected.
2 Use the ST +/– buttons to select a station
preset.
• You can also use the number buttons to do
this.

Listening to other sources

You can connect auxiliary sources (TV, satellite
receiver, etc.) to this unit for playback through
the speaker system. See Connecting auxiliary
audio components on page 33 for more on this.
• To connect a USB device to the USB
terminal, see USB playback on page 25.
1 Make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2 Press LINE to select the source.
3 If necessary, start playback of the source.