Connect The Battery - Enfora Spider AT User Manual

Spider® AT

5.1.2 CONNECT THE BATTERY

1. Insert the Battery into the Bottom Housing Assembly with the cable up and
to the right, as shown in Figure 14 Insert New Battery.
2. Connect the new battery by attaching the connector to the battery terminals.
3. The correct orientation of the battery cable prior to insertion into the PCB
mounted battery connector is with the red wire positioned closest to the wall
of the plastic housing. Shown in Figure 15 Battery Cable Orientation.
User's Guide
Figure 14 Insert New Battery
Figure 15 Battery Cable Orientation
P a g e 27 Revision: Draft