Table of Contents
Advertisement
04
Getting started
Chapter 4
Getting started
Using the on-screen displays
For ease of use, this system makes extensive
use of graphical on-screen displays (OSDs).
All the screens are navigated in basically the
same way, using the cursor buttons (
/
) to change the highlighted item and
pressing ENTER to select it.
Important
• Throughout this manual, 'Select' means
use the cursor buttons to highlight an item
on-screen, then press ENTER.
Button
What it does
HOME
Displays/exits the on-screen display
MENU
Changes the highlighted menu item
ENTER
Selects the highlighted menu item
RETURN
Returns to the main menu without
saving changes
Tip
• The button guide at the bottom of every
OSD screen shows you which buttons
you'll need to use for that screen.
Note
1 The screen saver will appear after five minutes of inactivity.
14
En
/
/
1
Playing discs
The basic playback controls for playing DVD,
CD, Video CD/Super VCD, DivX video and MP3/
WMA discs are covered here. Further functions
are detailed in chapter 5.
1
If the player isn't already on, switch it on.
If you're playing a DVD, Video CD/Super VCD or
DivX video, also turn on your TV and make sure
that it is set to the correct video input.
2
Press
on the front panel to load a disc.
Load a disc with the label side facing up, using
the disc tray guide to align the disc (if you're
loading a double-sided DVD disc, load it with
the side you want to play face down).
3
Press
(play) to start playback.
If you're playing a DVD or Video CD/Super VCD,
a menu may appear. See DVD-Video disc
menus on page 15 and Video CD/Super VCD
PBC menus on page 16 to navigate these.
If you're playing a DivX video or WMA/MP3
disc, it may take a few seconds before playing.
If you loaded a CD/CD-R/RW containing
JPEGs, a slideshow will start. See Playing a
JPEG slideshow on page 18 for more on this.
Hide quick links:
Advertisement
Table of Contents
