Create A Bluetooth Partnership - Pantech PC-8200N User Manual

2. Click Menu > Advanced.
3. In Internet connection, select the connection you want to use, and click Done.
Tip
After you use the connection once, you may want to change your Internet Connection
back to Automatic.

Create a Bluetooth partnership

Ensure that the two devices are within close range and that both Bluetooth-enabled
devices are discoverable.
1. On the Home screen, click Start > Settings > Connections > Bluetooth.
2. Click Menu > Devices > Menu > New. Your phone searches for other Bluetooth-
enabled devices and displays them in the list.
3. Select the device with which you want to create a Bluetooth partnership, and
click Add.
4. In Passkey, if you want to use a passkey (recommended for enhanced security),
enter a alphanumeric passkey between 1 and 16 characters, and click Done.
Otherwise, leave the passkey blank, and click Done.
5. Enter the same passkey on the other device.
Tip
Once you create a partnership, the Bluetooth-enabled devices don't need to be
discoverable to beam information between them; Bluetooth needs only to be turned on.
See also
Make your device discoverable
Create a dial-up connection
Every network connection is different. You should gather all of the relevant information
or network settings you need before starting this process.
1. On the Home screen, click Start > Settings > Connections.
2. Click Dial-up.
3. Click Menu > Add.
4. Enter the following information, and click Done.
•
In Description, enter a name for the connection.
•
In Connects to, select the network.
•
In Phone number, enter the phone number to be used to dial the network.
•
In User name, enter your network user name, if required.
•
In Password, enter your password, if required.
47/114