Receiving Calls; Ending Calls; Using The Phonebook; Using The Preset Dial - Sony MEX-BT5000 Operating Instructions Manual

E:\Working\2693038211\269303821MEXBT5000U\01US02CD-U.fm
01US+00COV-U.book Page 14 Thursday, April 27, 2006 11:03 PM
Tips
• Preset Dial also allows you to make a call by
pressing a number button twice after pressing
(CALL).
• On the "Dialed Calls," "Received Calls" and "Preset
Dial" menus, you can make a call by pressing
(CALL) while the phone number is displayed.
Presetting the volume of ring tone
and talker's voice
You can preset the volume level of the ring tone
and talker's voice.
To adjust the ring tone:
Rotate the joystick while the phone is ringing.
"Ring Vol" appears and ring tone volume is set.
To adjust the talker's voice:
Rotate the joystick during a call. "Talk Vol"
appears and the talker's voice volume is set.
Sending DTMF (Dual Tone Multiple
Frequency) tones
You can send DTMF tones.
To send DTMF tones, use the joystick or press
the required number buttons (0 – 9,
the card remote commander during a call.

Receiving calls

When receiving a call, ring tone is output from
your car speakers.
For details on the settings for receiving a call and
during a call, see "Setting a handsfree device" on
page 15.
1
When receiving a call, press (CALL),
(MENU) or (Bluetooth).
The phone call starts.
To reject a call
Press (OFF).
Tips
• If you set "Auto Answer" to on, the phone call is
automatically started in the set time (page 15).
• If (CALL) is pressed during a call, the handsfree
function is deactivated, and the microphone and
speaker of the cellular phone are activated. In this
case, the Bluetooth connection may become
disconnected depending on the cellular phone.

Ending calls

1
Press (OFF).
If the other party ends the call, talk time
appears for a few seconds.
14
Note
Even if the call is ended, the Bluetooth connection is
not canceled.

Using the Phonebook

Receiving phonebook data from a
cellular phone
1 Select "Phone Settings" from the Bluetooth
function menu.
2 Select "Receive PB."
"Waiting..." appears.
3 Send the phonebook data by operating the
cellular phone.
"Data Receiving..." appears while receiving
the phonebook data.
"Complete" appears when receiving is
complete.
Storing the numbers from "Dialed
Calls" or "Received Call"
1 Select "Dialed Calls" or "Received Call" from
or ) on
the CALL menu.
2 Select the phone number to store, then select
"PB Memory."
The "Contact Name" display appears.
3 Input a name.
Up to 20 characters can be input.
4 Select "Save?" c "yes."
Note
Up to 50 phone numbers can be stored in the
Phonebook. If you try to register more than 50
numbers, "Memory Full" appears.
Deleting from the phonebook
(Bluetooth)
(MENU)
1 Select "Phonebook" c "Contact List" from the
(CALL)
CALL menu.
2 Select the phone number to delete.
3 Select "Delete" c "yes."
To clear all phonebook data, select "Delete All"
in step 1.
Changing a name in the phonebook
1 Select "Phonebook" c "Contact List" from the
CALL menu.
2 Select the name to change.
3 Select "Edit Name," then input a new name.

Using the Preset Dial

Storing the Preset Dial
You can store a phone number in the phonebook
to the Preset Dial.
masterpage:Left
MEX-BT5000
2-693-038-21 (1)