7、Clear
Click clear diagram button, you can clear the data displayed in the chart. When collecting this
data with the previous data collection interval for a long time, the chart will update slower, then
you can click on the clear button, It will become faster.
8、3D
Click the three-dimensional buttons, call up the three-dimensional display screen, displaying
three-dimensional posture of the module. After starting the three-dimensional model, the default
interface is full screen, and to change back to the window mode, you can press the [F] key, if
you can not switch, press ctrl + Space to change the input method to English,then press [F]key
4.4 Connected to MCU
4.5 JY-61 connected to the microcontroller and output debug information
Usually, some MCU only have one serial port, the MCU will send the debug information
when debugging , then you can connect the TX of MCU to the RX of the USB to the serial port
http://www.aliexpress.com/store/1836321
- 7 -