The Unit Shut Down; Sound - Pioneer SBX-D201 Instruction Manual

SBX-D201
What you should check
Check if a button cell is
inserted correctly (anode and
cathode).
Check if the unit can be
operated with any of the
buttons on the subwoofer.

The unit shut down

What you should check
Switching sound mode
properly.
Switching input source
properly.

Sound

Sound does not come out.
What you should check
Check if the sound volume is
minimized.
Check if the Power indicator of
the subwoofer is flashing.
Check if the device is correctly
input.
Check if the device is properly
connected.
Check if a speaker cable is
disconnected from a terminal
of the speaker of the
subwoofer.
Check if power supply is
operated simultaneously with
HDMI on the television.
Check if a speaker is properly
switched from the television.
Check if optical digital sound is
correctly set.
18
Solutions and others
• Check the correct orientation (anode and cathode) of a
button cell. Insert it correctly if incorrect.
• If the unit cannot be operated with a remote controller after
the solutions above are tried, the remote controller may be
out of order. In this case, consult with the dealer from which
you purchased the product.
Solutions and others
• After switching once, please allow 2 or more seconds before
switching again.
• After switching once, please allow 2 or more seconds before
switching again.
Solutions and others
• Use the VOL (+) (–) button to increase sound volume.
• Press the MUTE button to cancel muting. (The VOL (+) (–)
button can be also used for canceling muting.)
• Select a device correctly.
• Check connection between SBX-D201 and the device. If
they are properly connected, something may be wrong with
a cable. Try another cable and retry connection.
• If SBX-D201 is connected with a television via HDMI (ARC),
check if a cable is inserted into an HDMI (ARC) input terminal
of the television.
• Check if a speaker cable is disconnected.
• Check if the covered part of the speaker cable is caught in a
terminal of the speaker.
• It takes around several seconds for the unit to produce
sound even if both the television and SBX-D201 are
switched on in the HDMI simultaneous operation function.
• If SBX-D201 is connected with the television via HDMI
(ARC), switch playing from television speaker to external
speaker device.
• If SBX-D201 is connected with the television via HDMI
(ARC), set optical digital sound to PCM.
14
–
15
15
15
15
15
13
12
11
–
–
–