Installation; Before You Start; Pairing Main Unit And Subwoofer - Pioneer HTP-SB300 Operating Instructions Manual

Installation

Chapter 1
Installation

Before you start

Before installing the unit and performing
connections with other components, confirm
that the main unit and subwoofer properly
support wireless communication.
• Place the main unit and subwoofer near
together.
• The power cords are furnished with
different connectors for the subwoofer and
AC adapter. Note that the power cord for
the AC adapter is contained in the same
box as the AC adapter.
For subwoofer
DC IN
OPTICAL
24V
AC adapter
Subwoofer
Downloaded From TheatreSystem-Manual.com Manuals
For AC adapter
COAXIAL
AUDIO IN
OUT
Main unit
To AC outlet
1 Plug the supplied AC adapter into the DC
IN socket on the back of the unit.
2 Plug the supplied power cord into the AC
adapter then plug the other end into a power
outlet.
3 Plug the supplied power cord into the AC
IN socket on the back of the subwoofer then
plug the other end into a power outlet.
Press  STANDBY/ON on the main unit.
4
Confirm that the indicators of the main unit
and subwoofer both light green.
• If either of the indicators does not light
green, perform pairing (see below).
• After confirming communication between
the two units, unplug the power cords and
perform installation and connections.

Pairing main unit and subwoofer

STANDBY/ON INPUT STEREO / A.L.C.
1 After you've finished making the AC
adapter and power cord connections, press 
STANDBY/ON on the main unit (see above).
2 Press on remote control.
3 While holding the main unit's STEREO/
A.L.C. button depressed, simultaneously
press the remote control's SHIFT and TV
CONTROL CH– buttons.
The indicator of the subwoofer light green, and
the pairing of main unit and subwoofer is
completed.
01
SYSTEM
SYSTEM
INPUT SOURCE
INPUT TV CONTROL
HDMI1 HDMI2
CH
OPTICAL COAXIAL INPUT
ENTER
7
En