Tspec Status And Statistics - Cisco WAP 121 Administration Manual

TSPEC Status and Statistics

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
REVIEW DRAFT Version 2—CISCO CONFIDENTIAL
The TSPEC Status and Statistics page provides the following:
• Summary information about TSPEC sessions by radio.
• Summary information about TSPEC sessions by VAP.
• Real-time transmit and receive statistics for the radio interface and the
network interface(s).
All of the transmit and receive statistics shown are totals since the AP was last
started. If you reboot the AP, these figures indicate transmit and receive totals
since the reboot.
To view TSPEC status and statistics, click
in the navigation window.
The TSPEC Status and Statistics page provides the following status information
for the WLAN (Radio) and VAP interfaces:
•
•
Stream (voice or video).
• —Whether the TSPEC session is enabled (up) or not (down) for the
corresponding Access Category.
This is a configuration status (does not necessarily represent the
current session activity).
•
for this radio and Access Category.
•
this radio and Access Category.
•
allocated for this Access Category over the transmission medium to carry
data. This value should be less than or equal to the maximum bandwidth
allowed over the medium for this TS.
•
unused bandwidth for this Access Category.
The following statistics display separately for the transmit and receive paths on
the wireless radio interface:
—Name of the Radio or VAP interface.
—Current Access Category associated with this Traffic
—Number of currently active TSPEC Traffic Streams
—Number of Traffic Stream clients associated with
—Time (in 32 microsecond per second units)
—Time (in 32 microsecond per second units) of
25