Panasonic AJ-HPX3000 Procedure page 4

6. Update program is started and the message "PREPARING FOR UPDATE" appears on screen. In this timing, it
is doing preparation such as the confirmation of the data of the updating. In this time,
is turned off.
display) lamp
7. When shifting to the update process of the flash and microcomputer, following screen is displayed. While
updating software, BUSY (operation mode display) lamp is flashed.
The name of firmware in the update is displayed.
Software update takes approx. 40 ~ 50 min.
8. In updating succeed, following screen is displayed. In this time, BUSY (operation mode display) lamp is
turned off.
The indicator of update is displayed.
Page4/5
AJ-HPX3000 update procedure Oct.2008
BUSY (operation mode
BUSY (operation mode display) lamp
FLASH
BUSY (operation mode display) lamp
OFF
Panasonic Corporation