Panasonic AJ-HPX3000 Procedure page 2

2. Update with the SD Card
2-1. Summary
1.Copy the update file of the Driver Software (Firmware) to an SD card.
2.Software can be updated using this SD card. (It is not suppurted MMC Card)
CAUTION: Before Update Software
●
Do not power down or pull card while upgrading.
part writing condition and the restart is not made.
2-2. Preparation
< Preparation for SD Card >
1. SD Card (more than 64MB memory card) is required.
2. Insert an SD card into the P2 equipment and format SD card.
NOTE: SD Card needs to be formatted by P2 equipment. SD card formatted by PC standard formatter will not
work.
< Copy of Image data for upgrade >
Copy the update file of Driver Software to the SD card as follows.
1. Download the Driver Software file "VSI*****.zip" from the support desk.
https://eww.pavc.panasonic.co.jp/pro-av/
2. Copy the file "VSI*****.zip" to the hard disk of your PC and extract the file.
3. Insert a formatted SD card into the card slot of PC.
4. Copy the whole folder "PRIVATE" in the extracted folder to the SD card.
NOTE: Do not change the construction of folder and the file name.
NOTE: External Power
It is best to power the unit from the external power supply. This will prevent the unit from shutting off during updating.
AJ-HPX3000 update procedure Oct.2008
If the program quits during loading, the data will be erased or
Page2/5
Panasonic Corporation