Advertisement
In the case of double-circuit plates (two circuits on cooling side), the connections of the 2 cooling
circuits F1/F2 and G1/G2 are on the same side, while on the opposite side there is the circuit for
the secondary fluid (W1 and W2).
On the side with the cooling connections, there are additional connections BW1 and BW2 which
can be used for temperature probes.
Depending on the type of application, the Onda plate connections may be of the following types:
threaded internally (ISO-G), with flexible joint (Victaulic) or welded.
The Onda standard plates of the gas-water type include attachments on the gas side of the
welded type.
7
Advertisement
