Advertisement
MAXIMUM DISTANCE 50 CM – MAXIMUM DISTANCE 30 CM
-
USE OF CONDENSATOR TYPE:
Connect the cooling circuit and water circuit as illustrated below: cooling entrance on the
upper left side and water entrance on the lower right side for single-circuit exchangers. For
double-circuit exchangers, the cooling entrance on the top and water entrance on the
bottom, with exit on the opposite side.
IN
OUT
OUT
IN
For all uses:
Avoid using quick-closure valves to prevent sudden flow interruptions and water
hammers
To prevent fatigue breakage of the exchanger, avoid excessive temperature and
pressure fluctuations by using suitable adjustment systems.
Verify compatibility between the fluids and the construction materials of the
exchanger.
5.5 Protection from vibration
Vibration coming from the system could damage the exchanger. Include flexible connections or
dilation compensators to prevent vibrations, pulsations and strain from transmitting to the
exchanger.
5.6 Isolation
Depending on the type of application, please isolate the exchanger.
IN
IN
OUT
OUT
11
OUT
IN
Advertisement
