Kenwood BL220 series Instructions Manual page 4

Children should be supervised to ensure that
l
they do not play with the appliance.
This appliance shall not be used by children.
l
Keep the appliance and its cord out of reach
of children.
Only use the appliance for its intended
l
domestic use. Kenwood will not accept
any liability if the appliance is subject to
improper use, or failure to comply with these
instructions.
before plugging in
Make sure your electricity supply is
l
the same as the one shown on the
underside of the appliance.
Important - UK only
The wires in the cord are coloured
l
as follows:
Blue = Neutral
Brown = Live.
The appliance must be protected by
l
a 3A approved (BS1362) fuse.
Note:
For non-rewireable plugs the fuse
l
cover MUST be refitted when
replacing the fuse. If the fuse
cover is lost then the plug must
not be used until a replacement
can be obtained. The correct fuse
cover is identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
If a non-rewireable plug is cut
l
off it must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
This appliance conforms to EC
l
Regulation 1935/2004 on materials
and articles intended to come into
contact with food.
Use your blender for soups, drinks,
pâtés, mayonnaise, breadcrumbs,
biscuit crumbs, chopping nuts
and crushing ice. Use your mill (if
supplied) for milling herbs, nuts,
coffee beans and purées.
before using for the first time
Wash the parts: see 'care and
l
cleaning'.
key
blender
blade assembly
a filler cap
b lid
a) plastic = locking lid
b) glass = push fit
c goblet
d sealing ring
e blade assembly
f power unit
g speed control + pulse
mill (if supplied)
h mill jar
i sealing ring (if supplied)
j blade assembly (if supplied)
k mill lid
Note: A separate blade assembly for
the mill will not be supplied with all
models, the sealing ring d and i
and blade assembly e and j are
identical and interchangeable.
to use your blender
1 Fit the sealing ring d into the blade
unit e - ensuring the seal is located
correctly in the grooved area.
Leaking will occur if the seal
l
is damaged or incorrectly
fitted.
4