Disassembly Instructions; Removal Of Mechanical Parts And P.c.boards; Top Cabinet And Front Cabinet; Flap - JVC HR-XVC1U Service Manual

1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1:

TOP CABINET AND FRONT CABINET

(Refer to Fig. 2-1)
Remove the 5 screws 1.
1.
2. Remove the Top Cabinet in the direction of arrow (A).
3. Disconnect the following connector: (CP651).
Unlock the 7 supports 2.
4.
5. Remove the Front Cabinet in the direction of arrow (B).
Remove the 3 screws 3.
6.
7. Remove the Operation PCB in the direction of arrow (C).
1
Front Cabinet
(B)
2
3
2
2
2
2
2
2
1-2: FLAP (Refer to Fig. 1-2)
1. Open Flap to 90˚ and flex in direction of arrow (A), at the
same time slide in direction of arrow (B).
2. Then lift in direction of arrow (C).
(C)

DISASSEMBLY INSTRUCTIONS

1
Top Cabinet
1
(A)
1
3
3
Operation PCB
CP651
Fig. 1-1
(A)
(B)

Flap

Fig. 1-2
1-3: VCR DECK (Refer to Fig. 1-3)
Unlock the 2 supports 1 and remove the Top Holder.
1.
Remove the 3 screws 2.
2.
3. Disconnect the following connectors: (CP101, CP102,
CP103 and CP3001).
4. Remove the AC Head Cover and VCR Deck in the
direction of arrow.

VCR Deck

1
CP3001
1-4: VCR MT PCB (Refer to Fig. 1-4)
Remove the screw 1.
1.
Remove the 7 screws 2.
2.
3. Disconnect the following connectors: (CP1701,
CP8001 and CP8002).
4. Remove the VCR MT PCB in the direction of arrow.
2

VCR MT PCB

1
1
1
AC Head Cover
Top Holder
1
1
CP101
CP102
CP103
CP1701
CP8001
CP8002
1
2
2 2
2
Fig. 1-3
2
2
Fig. 1-4
1-1