Knob - Pyle PHMD2 Instruction Manual

 Please take off any jewelry or other metal objects on your hand/arm. Keep the
detector away from the wall, floor and other metal objects.
 Be sure to keep the detector away from the light, TV, computer and mobile
telephone. These can cause electro-magnetic interference.
3. Turn on
Turn on the power supply by the SENS knob and set the volume knob to the
mid position.
4. Learn to use the ALL METAL mode.
Set the DISC knob to ALL METAL and SENS to the mid position(Fig.10).
 Sweep the metal samples you prepared 2 to 3 inches(5-8cm) above the center
of the search coil in turn the detector will respond with a "DI" tone and the
pointer will swing to the right for one time.(Fig.11)
Figure.9
Figure.10