Batteries; Figure - Pyle PHMD2 Instruction Manual

4. Loosen the knobs at the search coil's end, then adjust the search coil to the desired
angle. Let the search coil be parallel with the ground and be careful not to install
backwards. Long end of the search coil should face forward. (Figure.4).

Batteries

Please use six AA alkaline batteries.
1. Press the "key" on the battery compartment in the direction of the arrow. Pull out
the battery compartment cover (Figure.5). Note: the word UP is labeled on the
battery compartment, don't try to install upside down.
2. Insert six AA batteries into the compartment as indicated by the polarity symbols
marked inside the compartment (Figure.6).

Figure.4

Figure.5