Pioneer DVR-640H-S Operating Instructions Manual page 128

Additional information
15
Message
• Cannot play this disc.
• This disc cannot be recorded.
• Cannot read the CPRM information.
• Could not record the information to
the disc.
• Cannot edit.
• Could not initialize disc.
• Could not complete finalization
successfully.
• Could not undo finalization
successfully.
• Could not successfully unlock the
disc.
• Incompatible or unreadable disc.
• Cannot record to a disc that is not
CPRM compatible.
• Cannot record this content using
Video mode recording.
• This video cannot be recorded to
DVD+R/+RW.
• This content is copy protected.
• Incorrect CPRM information.
• Repairing disc.
• Repairing the HDD.
• Could not repair the disc.
• Overheating has stopped operation.
Press DISPLAY to clear message.
128
En
Explanation/Action
The disc may be dirty or damaged. Take out the
disc, clean it and retry. If the error persists, use a
new disc. If the error appears even with a new disc,
please consult a Pioneer Service Center.
The disc loaded is a playback-only disc type. This
display may also appear if the disc is dirty or
damaged.
The video source is copy-once protected. Use a VR
mode DVD-R/-RW disc with CPRM for recording.
The video source is copy-protected and cannot be
recorded.
The recorder could not read the CPRM
information. The recorder may be damaged—
please consult a Pioneer Service Center.
During recording, the power was cut. This display
appears when the power is restored.
The recorder was unable to repair the disc after a
power cut. The contents of the recording will be
lost.
The internal temperature of the recorder has
exceeded the operating limit. If this message
reappears, please contact a Pioneer authorized
service center.