Setting Up The Remote To Control Your Tv - Pioneer DVR-640H-S Operating Instructions Manual

Additional information
Setting up the remote to
control your TV
You can use the supplied remote to control
your TV. To be able to use this feature you
first have to program the remote with a
maker code from the table below.
1 Press and hold down the CLEAR
button, then enter the maker code for
your TV.
The LED indicator on the remote controls
lights.
See the table below for the list of maker
codes. If there is more than one code given
for your make, input the first one in the list.
• If the maker's name of your TV doesn't
appear in the table below, you will not be
able to use this remote to control your
TV.
2 Press TV to check that the remote
works with your TV.
If the remote is set up correctly, the TV
should switch on/off. If it doesn't and there is
another code given for your maker, repeat
step 1 with a new code.
15
131
En