Pioneer DVR-640H-S Operating Instructions Manual page 43

Recording
• For a DVD timer recording, if Optimized
Rec (see Optimized Rec on page 116) is
set to On, the recorder will adjust the
recording quality to try and fit the
recording on the disc. If the recording
will not fit onto the disc even on MN1
(MN4 for DVD+R/+RW) recording
quality then the Recovery Recording
feature will automatically make the
recording to the HDD instead.
• If there is very little free space left on the
HDD, an Auto Replace Recording may
not complete successfully.
• If the HDD is being used for playback or
high-speed copying when an Auto
Replace Recording is due to start, the
new timer recording will not replace the
old one. However, the next time the timer
recording starts, both of the older two
programs will be erased.
Editing a timer program
You can change any of the settings in a timer
program before the recording is due to start.
1 Press TIMER REC.
2 Highlight the timer program you
. . . .
want to change
3 Press then select 'Modify' from the
command menu panel.
Alternatively, press ENTER .
The Timer Program Set screen appears from
which you can edit the settings.
4 Edit the timer recording settings as
necessary.
5 Select 'Store Program' to finish.
Confirm the settings you made from the
following screen.
Deleting a timer program
You can delete timer programs you no longer
need.
1 Press TIMER REC.
2 Highlight the timer program you
. . . .
want to erase
3 Press then select 'Erase' from the
command menu panel.
• Select Yes to confirm or No to cancel.
• You can also just press CLEAR when the
timer program is highlighted.
Skipping a regular timer program
If you've set a regular daily or weekly timer
program, you can set the recorder to skip the
next scheduled recording.
1 Press TIMER REC.
2 Highlight the timer program you
. . . .
want to skip
3 Press then select 'Cancel Once'
from the command menu panel.
• In the timer program list, Cancel Once
appears by the program.
• You can also just press
the timer program is highlighted.
Extending a timer recording in
progress
You can extend a timer recording beyond the
programmed end time in two different ways.
This can be useful if a broadcast program
overruns, for example.
05
PAUSE when
43
En