Pioneer DVR-640H-S Operating Instructions Manual page 111

The Initial Setup menu
Setting
HELP Setting
Setup Navigator
Tuner
Auto Channel
Setting
Manual CH Setting
Channel Swapping
Options Explanation
On • Switches on the automatic Help screens for GUI dis-
plays.
Off Switches off the automatic Help screens for GUI dis-
plays. (Press HELP on the remote to manually display
the Help screen.)
Start
Select to start the Setup Navigator. See also
ing on and setting up
Next Screen
Proceed to the next screen, select your country, then
wait for automatic tuning to complete. The channel
mapping screen should appear when the recorder is
set up. Press ENTER to exit this screen.
Next Screen Proceed to the next screen if you need to adjust any
of the settings made by auto tuning. Select your
country, then proceed to the manual channel setting
screen:
• Change channel presets using the
• To skip the displayed channel (because there is no
station assigned to that channel), change the Skip
setting to On.
• Set the CH SYSTEM setting to match the channel
system of your country or region.
• Set the CHANNEL setting to the channel you want
to assign to the current channel preset.
• To manually fine tune the channel, change the AFT
setting to Off then adjust the Level setting.
Set the Sound System setting to match the
•
sound system of your region.
• The Name field allows you to input a name of up to
five characters for the current channel preset.
Next Screen Proceed to the next screen to swap channel
assignments of different presets so that you can
group together presets that naturally go together.
Select two presets to swap then press ENTER.
on page 28
NEXT buttons.
14
Switch-
.
PREV /
111
En